According to the type of paint used the painting booth can be divided in two groups:
1.Painting booth in which the paints of different organic alcohols, solvents are used
2.Painting booth in which powder paint is used, while the paint is sprayed in the booth electrostatic spraying and the following melting of paint in special both of the heating.

Pre-filtration from dust and aerosols before coming into the booth is necessary as well as the filtration of exhaust air from particles of that point, which is not sprayed on product (article), and from vapours of organic solvents, which make the basis of the paint.

For the purpose of incoming air cleaning we normally use multi phase air filtration where the filters for rough cleaning are installed for the first phase. High efficient filters for the 2 phase and ceiling filter of F5 class is set on the ceiling of painting booth as a final stage.

Vyrábíme filtry hrubého čistění, které se používají k hrubému předčistění vzduchu, přiváděného do místnosti. Mezi tyto filtry patří filtry třídy G2-G4 podle EN779. Tyto filtry se zpravidla instalují na vzduchové přepážce a chrání přívodní zařízení před znečištěním. K těmto filtrům se řadí  ploché PPF, vrapované FF a kapsové PF třídy G3 a G4.

Vyrábíme filtry jemného čistění vzduchu třídy F5-F9 dle EN779, FMP-F, PF, HFMF-H, které zabezpečují požadovaný stupeň vyčistění vzduchu, přiváděného do místností se zvýšenýni nároky na čistotu vzduchu: pětihvězdičkové hotely, kanceláře kategorie A, léčebná zařízení (s výjimkou operačních sálů a aseptických místností) atd.

Pro zabezpečení čistění velkých objemů vzduchu mohou být využity filtrační sekce FCPF a skládaných FCCF filtrů.

Dodáváme rolované filtrovací materiály, které se obvykle používají v kazetách filtrů hrubého (předběžného) čistění v systémech ventilace a klimatizace vzduchu a také mohou být v řadě případů využity pro čistění odsátého vzduchu.

It exhausts air only that requires filtration in these booths. This air is coming out of boots for electrostatic spraying. It contains the dust that has not covered the painted product.

Cartridge filters of DCF type are used for cleaning of air. In these cases the dust concentration of cleaning air is high (several grams for m3). Then it is necessary to set pre-cleaning (cyclone CC-15) before DCF filters.

The cartridge filters with the pulsed jet of type DCF

The cartridge filters with the pulsed jet of type DCF are used for the high efficient cleaning of air from all types of dusts (including finely dispersed solid aerosols).

Filters of type DCF are more efficient as compared to the baghouse filters and are able to catch finely dispersed aerosols, which are formed, for instance, in the process of plasma or laser sharpening, welding or other technological processes, connected with the formation of condensed aerosol.

full description-to click here

The cyclones of type CC-15

The cyclones of type CC-15 can not be used in explosive environments; it is not recommended to use them for catching highly agglutinating dusts, especially with small diameters of cyclones.

Depending on air flow and conditions of application cyclones can be single (internal diameter from 200 to 2000 mm) or group - of two, four, six and eight cyclones with identical internal diameter (from 300 to 900 mm). Group cyclones can be manufactured with the "left" and "right" rotation of a gas stream, single - only with the "right" rotation.

full description-to click here

Filtering elements of cartridge type CFE

Filtering elements of cartridge type CFE are used for equipping cartridge (selfcleaning) filters, which are to be use in different branches of industry for cleaning of the aspiration air from different types of dusts.

The filtering elements of cartridge might also to be used in the systems of air prepared for gas turbine and compressed air installations. The filtering elements of these filters work in the modes of regeneration (selfcleaning), which is realized through the pulsed jet by compressed air.

CFE can be made of various filter materials on the base of cellulose, synthetic fibers (polyether, polypropylene) and mix of cellulose and synthetic fibers as well.

Filter materials obtain high efficiency of cleaning and might be chosen according to requirements of the customers. The efficiency of standard CFE filters for most types of dusts is normally not less than 99.9%. For capturing of finely dispersed aerosols (plasma, laser sharpening of metals, etc) the high efficient synthetic medium with the efficiency of cleaning not less than 99.9% according to particles having size of 0,5-1,0 mkm can be used.

full description-to click here